YAMAHA CHOPPER PROJECT
DESIGN | MAIN | ASSEMBLY

2005/04/07:
The cheap stock-style Harley petcock hung down too low and was really ugly, so I splurged on a much nicer petcock. I was a bit worried that it had a 5/8" outlet where all the other plumbing is 1/4", but it turns out that my 1/4" hose was flexible enough to slip over the outlet no problem.

The other components in the fuel line are a Fuel Filter to keep any junk out of the carbs, and a "T" splitter, because each carb has its own inlet. (the original Yamaha ran dual petcocks and fuel lines)

It's official: we can run fuel.

DESIGN | MAIN | ASSEMBLY
email: mikebike@rocketcar.net